Коригиране: Приложението не можа да стартира правилно 0xc0000005

Windows 10 е една от най-очакваните версии на Windows от Microsoft. Въпреки че Windows 8 създаде нова тенденция в света на Desktop OS, имаше някои проблеми в дизайна и производителността, които бяха основният фокус за Microsoft в Windows 10. И така, Windows 10 Final Build беше разкрит на 29 юли 2015 г. за Desktop като както и смартфони.

Той включваше много модификации, като държеше под внимание недостатъците на Windows 8. Всъщност това е усъвършенствана версия на Windows, но все пак има редица последици, настъпващи всеки ден при различни потребители.

Основна част от тези последици са грешките, които се появяват при опит за изпълнение на определена задача. Редица хора са получили съобщение за грешка, докато се опитват да отворят различен софтуер и браузъри в своя Windows 10. Тази грешка идва със съобщение за грешка, в което се казва, че приложението не може да се стартира правилно (0xc0000005). Щракнете върху OK, за да затворите приложението . Тази грешка обикновено се появява при интернет браузърите, но не се ограничава само до тях. Всяко приложение в Windows може да спре да реагира поради тази грешка. Така че, той трябва да бъде поправен, за да върне обратно този основен софтуер обратно към работа.

12.11.2016 г.: Потребителите съобщиха, че изброените по-долу методи ще работят и в Windows 7.

Причина зад грешката 0 на Windows 10 0xc0000005:

Има редица известни причини, които причиняват тази грешка да наруши работата на различен софтуер в Windows 10. Една от причините, които се считат за основна причина, е антивирусна програма на трета страна, която причинява конфликти с изпълними файлове и влияе върху техните операции. От друга страна, регистрите могат да се повредят поради злонамерен софтуер и вируси, които карат програмите да се държат необичайно. Понякога лошите хардуерни драйвери също могат да бъдат виновникът, който причинява тази грешка.

Решения за отстраняване на грешка в Windows 10 0xc0000005:

Въз основа на гореспоменатите причини решенията са директни. Така че, преминете през следните методи, за да се отървете от това разочароващо съобщение за грешка.

Поправяне на повредени системни файлове

Изтеглете и стартирайте Restoro, за да сканирате и възстановите повредени и липсващи файлове от тук , след като приключите, продължете с решенията по-долу. Важно е да се уверите, че всички системни файлове са непокътнати и не са повредени, преди да продължите с решенията по-долу.

Метод # 1: Коригиране на антивирусната програма

Антивирусните програми могат да повлияят на изпълнимите файлове на редица програми. Така че, за да разрешите този проблем, трябва да деактивирате антивирусната програма на трета страна, за да проверите дали тя е виновникът или не. Моля, обърнете внимание, че деактивирането на антивирусни програми може да доведе до сериозни заплахи за вашия компютър, когато е свързан с интернет.

Можете също така да разчитате на собствения софтуер за сигурност на Windows, т.е. Windows Defender . Той има същата функционалност като всеки друг антивирус. Можете да деактивирате антивируса, като отворите настройките му и изключите екрана.

0xc0000005-1

След като е деактивиран, проверете отново за грешка. Ако все още продължава, преминете към следващия метод.

Метод # 2: Поправяне на регистри

В регистъра е централната база данни на Windows, която постоянно се използва от вашия компютър, за да го прочетете много различни файлове и настройки, които трябва да се проведе. Регистрите могат да се повредят поради повреда на някои файлове, необходими за подреждане на всичко на място. Ето защо повечето експерти препоръчват да направите резервно копие на системния регистър и да го съхранявате на конвенционален USB стик, за да можете да съживите своя регистър в предишното състояние в случай на повреда. Но ако не сте архивирали своя регистър, изпълнете следните стъпки, за да коригирате регистрите, за да разрешите грешката 0xc0000005 .

1. Изтеглете софтуера за почистване на системния регистър от тази връзка .

2. След като бъде изтеглен, инсталирайте го, като използвате препоръчаните настройки. Отворете софтуера след приключване на инсталационния процес.

3. На интерфейса щракнете върху раздела „ Регистър“ в левия прозорец и щракнете върху бутона с надпис „ Сканиране за проблеми“ . Той ще започне да търси грешки в системния регистър и когато търсенето приключи, ще се активира бутон Fix Selected Issue . Кликнете върху този бутон и всичко ще бъде поправено.

0xc0000005-2

Метод # 3: Поправяне на повредени драйвери

Драйверите са софтуерните програми, които помагат на компютъра да комуникира с хардуер, прикрепен към него. Така че, когато са повредени, хардуерът има тенденция да причинява проблеми . Поправянето на тези дефектни водолази може да ви помогне по няколко начина. Следвайте стъпките по-долу.

1. Отворете диспечера на устройствата, като натиснете Win + X и го изберете от списъка.

2. Вътре в диспечера на устройствата превъртете надолу, за да видите дали има хардуер с жълт знак. Ако има, щракнете с десния бутон на мишката и изберете Update Driver Software . Ако наскоро сте инсталирали драйвери, преинсталирайте и тези драйвери.

0xc0000005-3

3. В прозореца, който се появява след това, щракнете върху Търсене автоматично за актуализиран софтуер на драйвера, за да му позволите да търси и инсталира драйвери автоматично. В случай, че сте изтеглили драйверите ръчно, щракнете върху опцията по-долу, за да ги разгледате и инсталирате. След като процесът приключи, проверете за грешка.

0xc0000005-4

Метод # 4: Поправете BCD

Този метод трябва да се извършва от потребителите на техен риск. Това работи за някои и не за някои. Също така ще трябва да активирате отново Windows, след като изпълните стъпките в това ръководство.

  1. Дръжте Windows ключ и натиснете X . Изберете команден ред (администратор)
  2. Въведете „ bcdedit“ и натиснете ENTER. Ако вашият път за зареждане на Windows е xOsload.exe, тогава трябва да премахнете някои файлове и да поправите вашия BCD. Можете да видите това в полето PATH, след като изпълните командатаbcdedit”.
  3. След като приключите, изпълнете следните команди по-долу, някои може да се върнат не намерени, но да игнорират грешките и да продължат до последната. Уверете се, че натискате клавиша ENTER след всяка команда.
Del D: \ Windows \ System32 \ xOsload.exe Del D: \ Windows \ System32 \ xNtKrnl.exe Del D: \ Windows \ System32 \ Drivers \ oem-drv64.sys attrib c: \ boot \ bcd -h -r -s ren c: \ boot \ bcd bcd.old bootrec / rebuildbcd

Метод 5: Проверка за актуализации на Windows

Актуализациите на Windows често съдържат поправки за някои грешки и проблеми, но също така са известни с това, че отстъпват място на нови проблеми на компютрите на хората. В тази стъпка обаче ще проверяваме за актуализации за вашата операционна система, тъй като Microsoft често закърпва всички проблеми, които идват от техните актуализации. За да направите това, следвайте ръководството по-долу.

  1. Натиснете „Windows ' + „ I “, за да отворите настройките на Windows.
  2. В настройките кликнете върху опцията „Актуализации и сигурност“ и от лявата страна изберете опцията „Windows Update“ .
  3. На следващия екран щракнете върху опцията „Проверка за актуализации“ и той автоматично ще подкани Windows да провери за налични актуализации.
  4. След като проверката за актуализация приключи, щракнете върху бутона „Изтегляне“, за да стартирате изтеглянето и инсталирането на нови актуализации на вашия компютър.
  5. След като тези актуализации бъдат инсталирани, проверете дали това е отстранило проблема на вашия компютър.

Метод 6: Възстановяване на компютър

Ако току-що сте започнали да получавате този проблем, той може да се задейства поради неправилна инсталация на драйвер или дори поради измамно приложение, което може би сте инсталирали на вашия компютър наскоро. Следователно в тази стъпка ще върнем състоянието на компютъра на по-ранна дата и се надяваме, че това трябва да поправи проблема ни, ако се дължи на горепосочените причини. За да направите това:

  1. Натиснете “Windows” + “R”, за да отворите подканата за изпълнение.
  2. Въведете „rstrui“ и натиснете „Enter“, за да отворите прозореца за управление на възстановяването.Изпълнение на диалоговия прозорец: rstrui
  3. Кликнете върху „Напред“ и проверете опцията „Показване на повече точки за възстановяване“ .
  4. Изберете точка за възстановяване от списъка, която е преди датата, на която е възникнал този проблем.
  5. Щракнете отново върху „Напред“ и следвайте инструкциите на екрана, за да върнете всичко обратно към избраната дата.
  6. След като възстановяването приключи, проверете дали проблемът продължава да съществува.

Метод 7: Активиране на защитната стена

Възможно е в някои случаи грешката да се задейства, тъй като приложението е подозрително или поне ако е било означено като подозрително и защитната стена на Windows не работи на вашия компютър, за да потвърди това подозрително. Следователно, в тази стъпка ще се уверим, че защитната стена на Windows е активирана, за да се отървем от тази грешка. За това:

  1. Натиснете “Windows” + “R”, за да отворите подканата за изпълнение.
  2. Въведете „Control Panel“ и натиснете „Enter“, за да стартирате класическия интерфейс на Control Panel.
  3. В контролния панел кликнете върху опцията „Преглед по:“ и изберете бутона „Големи икони“ .
  4. След като направите този избор, щракнете върху опцията „Защитна стена на Windows Defender“, за да стартирате защитната стена и след това изберете „Включване или изключване на защитната стена на Windows Defender“.
  5. Не забравяйте да проверите „Включване на защитната стена на Windows Defender“ за двете налични опции за включване на защитната стена.
  6. След като направите този избор, запазете промените си и затворете от прозореца.
  7. След това проверете дали проблемът продължава да съществува.

Метод 8: Стартирайте SFC сканиране

In some situations, you might’ve installed a bad driver on your computer or at some point, due to a storage failure, some system files or drivers might’ve been corrupted. Therefore, in this step, we will be running a complete system scan to identify any drivers that are missing signatures or to fix any abnormalities in the system files. For that:

  1. Press “Windows’ + “R’ to open the Run prompt.
  2. Type in “cmd” and then press “Shift’ + “Ctrl” + “Enter” to provide admin permissions.Running the Command Prompt
  3. Type in the following command inside the command prompt and press “Enter” to execute it.
    sfc /scannow
  4. Let the computer scan for any broken or corrupted items and it should automatically replace them with working ones.
  5. Check to see if doing so fixes the error message.

Method 9: Disabling Data Execution Prevention

Data Execution Prevention is a program that prevents certain programs or executables from being able to run on your computer because it suspects that they might be viruses. Due to this prevention, sometimes, as a false alarm, legit applications might also face issues while trying to run on your computer. Therefore, in this step, we will be disabling this setting from the system configuration panel. For that:

  1. Press ‘Windows’ + “R’ to open the Run prompt.
  2. Type in “Control Panel” and press “Enter” to launch the classical control panel interface.
  3. Inside the Control Panel, click on the “View By:” icon and then select the “Large Icons” option.
  4. After selecting Large Icons, select the “System” option.
  5. Click on the “Advanced System Settings” option on the left side of the screen.
  6. In the advanced System Settings, click on the “Advanced” tab from the top.
  7. In the advanced tab, click on the “Settings” option under the “Performance” heading.Изберете Настройки
  8. On the next window that opens up, click on the “Data Execution Prevention” tab, and then select the “Turnon DEP for all programs except thoseI Select” option.
  9. After that, click on the “Add” option and point to the executable of the application that you are facing issues with.
  10. This way, that application will no longer come under the jurisdiction of the DEP program.
  11. Check to see if doing so has fixed the issue.

If the above process is unable to fix the issue, it might be because the executable isn’t the only one being affected by the DEP program. Sometimes the DEP might actually be preventing a herd of executables from being run on the computer and to counter this we will be disabling DEP completely.

Disabling DEP completely cannot be done through any Windows setting and it needs to be done manually through the command prompt. Remember to take this step as a last resort because this can in some cases makes your computer more vulnerable to viruses and malware attacks. In order to disable DEP through the command prompt:

  1. Press “Windows” + “R’ to open the Run prompt.
  2. Inside the Run prompt, type in “cmd” and then press “Shift” + “Ctrl” + “Enter” to launch in admin mode.
  3. Inside the command prompt, type in the following command and press “Enter” to execute it on your computer.
    bcdedit.exe /set {current} nx AlwaysOff
  4. Once the command has been executed, run the application that you want to and check to see if the error message still persists.

Method 10: Disable Firewall and Windows Defender

In some situations, the executable that you want to run on the computer might actually be blocked by the Firewall and it would not be able to make contact with its servers this way. Therefore, we will have to allow the executable in our Firewall for both public and private networks which should get it working if the Firewall is preventing it.

In addition to that, sometimes the Windows Defender might prevent the application from running on your computer because its local files might be suspicious and not properly signed. This can be due to a false alarm as well so we will be disabling the Windows Defender for the application as well by adding an exclusion. In order to do that:

  1. Press “Windows” + “R” to launch the Run prompt.
  2. Type in “ControlPanel” and press “Enter” to launch the classical control panel interface.
  3. Click on the “View by:” button, select “Large Icons” and then click on the Windows Defender Firewall option.
  4. Select the “Allow an app orfeature through the Firewall” button on the left pane and then click on the “Change Settings” button and accept the prompt.Кликнете върху Разрешаване на приложение или функция чрез защитната стена на Windows Defender
  5. From here, make sure that you check both the “Public” and the “Private” options for the application and its entries.
  6. Save your changes and exit out of the window.
  7. After that, press “Windows” + “I” to launch the settings and click on the “Updateand Security” option.
  8. From the left pane, click on the “Windows Security” button and then click on the “Virus and Threat Protection” button.
  9. Select the “Manage Settings” button under the Virus and Threat Protection Settings heading.
  10. Scroll down and click on the “Add or Remove Exclusions” button in the next window.
  11. Click on the “Add an Exclusion” option and select “Folder’ from the File type.
  12. Make sure to specify the application’s folder with which the issue is occurring and exit out of this window after saving your changes
  13. Check and see if doing so has fixed the error message.

Method 11: Reinstall Firefox

If you are getting this error while trying to launch Firefox, it might be occurring because the applications haven’t been installed properly on your computer. Therefore, in this step, we will be launching the app management window and uninstalling Firefox after which we will reinstall it completely by downloading it from the Firefox website. For that:

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “appwiz.cpl” and press “Enter” to open the app management window.
  3. In the app management window, scroll down and right-click on the “Firefox” application.
  4. Select “Uninstall” from the list and then follow the on-screen instructions to remove the software from your computer.
  5. Repeat this step for all instances and bundled applications of the software installed on your computer.
  6. Make sure to disable any third-party antiviruses at this point to make sure that the software is installed smoothly.
  7. Head on over to the Mozilla website and click on the download button.
  8. Click on the downloaded executable and install it on your computer following the on-screen instructions.
  9. Check to see if doing so has fixed the error message on your computer.

Method 12: Scanning for Malware

It is possible in some cases that the computer has acquired malware that is preventing the user from being able to run all the system functions on their computer. Therefore, in this step, we will be using the default Windows Defender to scan our computer thoroughly for any viruses or malware that might’ve found its way on our computer. For that:

  1. Press the “Windows” + “I” keys simultaneously on your PC to open the Settings tab.
  2. Navigate to the Update& Security option and then click on the “Windows Security” button on the left tab.
  3. After that, click on the “Open Windows Security” and select the “Virus and Threat Protection” option.
  4. After that, click on the “Scan Options” button below the “Quick Scan” window.
  5. Click on the “Full Scan” option and then hit the button of “Scan Now”.
  6. Wait for a few seconds while this process gets completed and then finally check if the error gets resolved now.

Microsoft Security Scanner is an additional tool that you can use to test the system for any further viruses and malware because sometimes the default tool isn’t able to perform the scan properly. Therefore, in this step, if the issue still hasn’t been resolved, we will be using the Microsoft Security Scanner to further make sure for any issues.

  1. Launch your browser and download the Microsoft Security Scanner from here.
  2. After downloading the executable, run it on your computer and let it install.
  3. Accept the License Agreement terms and click on “Next”.
  4. Select “Full Scan” and click on “Next”.
  5. After you opt for a full scan, the software will start scanning your entire computer to look for any malware or viruses that might’ve disguised themselves as normal executables or applications.
  6. After this scan has been finished, check to see if the error message still persists.

Method 13: Install Missing Drivers

It is possible in some situations that your device is missing certain drivers due to which this particular issue is being triggered on your computer. Therefore, we will be checking for any missing drivers and then we will check to see if the error is fixed. In order to do this, follow the guide below.

  1. Download Driver Easy on your computer.Изтеглете Driver Easy
  2. Run the downloaded executable and install the software on your computer.
  3. Run the check and see if there are any missing drivers on your computer.
  4. Install these missing drivers and then install them either manually or automatically using the Software.
  5. After installing all the missing drivers, check to see if the issue still persists.

Method 14: Reconfigure Registry

It is possible that in some cases, you haven’t properly configured all the registry settings or that you unknowingly configured something incorrectly. Therefore, in this step, we will be reconfiguring our Registry to fix a certain key that sometimes, if misconfigured, causes this particular error on Windows. In order to do this, follow the guide below.

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “regedit” and press “enter” to launch the registry editor.
  3. Inside the registry editor, navigate to the following location.
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_Dlls
  4. Double click on the “LoadAppInit_DLLs” entry on the right side of the screen.
  5. Change the value of this registry from “1” to “0”.
  6. Save your changes and exit the registry editor.
  7. Check to see if doing so has fixed the error.

Method 15: Update Disk Drivers

In some cases, the Disk Drivers that are being used to control your Storage and other Disks installed on the computer might have been outdated due to which the error is being triggered. Therefore, in this step, we will first be opening the Device Management Window and from there, we will be updating these drivers. In order to do so, follow the steps mentioned below.

  1. Press “Windows’ + “R” to open the Run prompt.
  2. Type in “Devmgmt.msc” and press “Enter” to launch the device management window.
  3. In the Device Manager, double click on the “DiskDrives” option to expand it.
  4. Right-click on the storage device listed and select the “Update Driver” option.
  5. Select the “Search Automatically for Drivers” option and let the setup search.
  6. If there are any drivers available, Windows will automatically check for them and install them on your computer.
  7. Check to see if doing so has fixed the issue.

Method 16: Disabling Automatic Updates and Uninstalling Updates

It is possible in some cases, that this error is stemming from a faulty update install. Microsoft is notorious for pushing out updates that aren’t properly customized to work for all hardware combinations and often go on to break things instead of making them better. Therefore we will make sure that the recent update isn’t installed on our computer.

In order to do this, we will have to first disable automatic updates on our computer and then we will be uninstalling the recently installed updates. Make sure to back up any important data that you don’t want to lose just in case this goes bad.

  1. Press “Windows” + “R’ to open the Run prompt.
  2. Type in “service.msc” and press “Enter”.
  3. Scroll through the list and double click on the “Windows Update” service.
  4. Click on the “Stop” button and then click on the “Startup Type” dropdown.
  5. Select “Disabled” from the list and select the “Apply” button from the window.
  6. Click on “OK” to close out of this window.
  7. Check to see if doing so has stopped your computer from updating.

After stopping the computer from updating, we will now be uninstalling the recent updates that have been installed on your computer. For that:

  1. Press “Windows” + “I” buttons to open the settings.
  2. In settings, click on the “Update and Security” option and then select the “Windows Update” button from the left pane.
  3. In the Windows Update, click on the “View Update History” option.
  4. In the Update History, click on the “Uninstall Updates” option and it should take you to the uninstallation screen where all the recently installed updates will be listed.
  5. From the list, right-click on the update that was installed recently and caused this error on your computer.
  6. Right-click on this update and select the “Uninstall” button to remove it completely from the computer.
  7. Follow through with the on-screen instructions.
  8. Check to see if uninstalling has fixed this issue.

Additional Fixes:

  • In addition to some of the recommendations given above, you should try to check if there are any bad memory modules (RAM) installed on your computer which can be a cause of this.
  • Също така, не забравяйте да проверите дали не сте овърклоквали RAM паметта си до ниво над препоръчаната граница. Ако сте го направили, опитайте се да го върнете към фабричните настройки и проверете дали това решава проблема ви.